No image available
Other Products ｜JBL 306P MkII Powered 6.5" Two-Way Studio Monitor
USD 89.77
Other Products / General Merchandise / Other Products
Key Features
Bi-Amplified Powered Reference Monitor
Dual 56W Class-D Amplifiers
Low Frequency Woofer: 6.5"
Neodymium Woven-Composite Tweeter: 1"
Image Control Waveguide Technology
Balanced XLR and 1/4" TRS Inputs
3-Position HF Trim Switch
Boundary EQ for Placement Near Walls
Slip Stream Low-Frequency Port Design
Selectable Input Sensitivity Switch
Overview
Audio engineers, producers, and musicians looking for a high-quality monitoring solution will be impressed with the JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor, a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 306P MkII features dual 56W Class-D amplifiers, which power the 6.5" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 47 Hz to 20 kHz with a peak SPL of 110 dB.
The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 306P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 306P MkII ships with a power cord.Key Specs
Monitor Type & Configuration
Active 2-Way
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Frequency Range
39 Hz to 24 kHz (-10 dB)
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
Wireless
No
Number of Included Monitors
Single Monitor
Enclosure
Bass-Reflex/Ported, Shielded
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Amplifiers
HF: 56 W Class-DLF: 56 W Class-D
Frequency Range
39 Hz to 24 kHz (-10 dB)
Frequency Response
47 Hz to 20 kHz ± 3 dB
Maximum Sound Pressure Level (SPL)
110 dB
Signal-to-Noise Ratio
75 dBA
Total Harmonic Distortion (THD)
<10%
THD+N
< 0.2%
Maximum Input Level
+20.3 dBu (Balanced)+6 dBV (Unbalanced)
Protections and Limiting
Peak Limiter
EQ
HF ShelfLF Shelf
Crossover Frequency
1425 Hz, 24 dB/Octave Slope
Crossover Type
Linkwitz-Riley
Connectivity
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
USB
No
Wireless
No
Mobile App Compatible
No
Power
AC Input Power
100 to 240 VAC, 50/60 Hz
Physical
Color
Black
Monitor Orientation
Vertical
Enclosure Material
ABS, MDF
Mounting Points
No
Dimensions (W x H x D)
8.8 x 14.2 x 11.1" / 223.5 x 360.7 x 281.9 mm
Weight
13.4 lb / 6.1 kg
Packaging Info
Package Weight
16.05 lb
Box Dimensions (LxWxH)
16.5 x 13.3 x 11.75"
What's in the Box:
JBL 306P MkII Powered 6.5" Two-Way Studio Monitor
Power Cord
Limited 2-Year Manufacturer Warranty
Brand:JBLSKU:306P MKIITags:306P MKII, jbl 306p, Loudspeaker
View productBi-Amplified Powered Reference Monitor
Dual 56W Class-D Amplifiers
Low Frequency Woofer: 6.5"
Neodymium Woven-Composite Tweeter: 1"
Image Control Waveguide Technology
Balanced XLR and 1/4" TRS Inputs
3-Position HF Trim Switch
Boundary EQ for Placement Near Walls
Slip Stream Low-Frequency Port Design
Selectable Input Sensitivity Switch
Overview
Audio engineers, producers, and musicians looking for a high-quality monitoring solution will be impressed with the JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor, a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 306P MkII features dual 56W Class-D amplifiers, which power the 6.5" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 47 Hz to 20 kHz with a peak SPL of 110 dB.
The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 306P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 306P MkII ships with a power cord.Key Specs
Monitor Type & Configuration
Active 2-Way
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Frequency Range
39 Hz to 24 kHz (-10 dB)
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
Wireless
No
Number of Included Monitors
Single Monitor
Enclosure
Bass-Reflex/Ported, Shielded
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Amplifiers
HF: 56 W Class-DLF: 56 W Class-D
Frequency Range
39 Hz to 24 kHz (-10 dB)
Frequency Response
47 Hz to 20 kHz ± 3 dB
Maximum Sound Pressure Level (SPL)
110 dB
Signal-to-Noise Ratio
75 dBA
Total Harmonic Distortion (THD)
<10%
THD+N
< 0.2%
Maximum Input Level
+20.3 dBu (Balanced)+6 dBV (Unbalanced)
Protections and Limiting
Peak Limiter
EQ
HF ShelfLF Shelf
Crossover Frequency
1425 Hz, 24 dB/Octave Slope
Crossover Type
Linkwitz-Riley
Connectivity
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
USB
No
Wireless
No
Mobile App Compatible
No
Power
AC Input Power
100 to 240 VAC, 50/60 Hz
Physical
Color
Black
Monitor Orientation
Vertical
Enclosure Material
ABS, MDF
Mounting Points
No
Dimensions (W x H x D)
8.8 x 14.2 x 11.1" / 223.5 x 360.7 x 281.9 mm
Weight
13.4 lb / 6.1 kg
Packaging Info
Package Weight
16.05 lb
Box Dimensions (LxWxH)
16.5 x 13.3 x 11.75"
What's in the Box:
JBL 306P MkII Powered 6.5" Two-Way Studio Monitor
Power Cord
Limited 2-Year Manufacturer Warranty
Brand:JBLSKU:306P MKIITags:306P MKII, jbl 306p, Loudspeaker
Product details
Key Features
Bi-Amplified Powered Reference Monitor
Dual 56W Class-D Amplifiers
Low Frequency Woofer: 6.5"
Neodymium Woven-Composite Tweeter: 1"
Image Control Waveguide Technology
Balanced XLR and 1/4" TRS Inputs
3-Position HF Trim Switch
Boundary EQ for Placement Near Walls
Slip Stream Low-Frequency Port Design
Selectable Input Sensitivity Switch
Overview
Audio engineers, producers, and musicians looking for a high-quality monitoring solution will be impressed with the JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor, a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 306P MkII features dual 56W Class-D amplifiers, which power the 6.5" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 47 Hz to 20 kHz with a peak SPL of 110 dB.
The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 306P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 306P MkII ships with a power cord.Key Specs
Monitor Type & Configuration
Active 2-Way
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Frequency Range
39 Hz to 24 kHz (-10 dB)
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
Wireless
No
Number of Included Monitors
Single Monitor
Enclosure
Bass-Reflex/Ported, Shielded
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Amplifiers
HF: 56 W Class-DLF: 56 W Class-D
Frequency Range
39 Hz to 24 kHz (-10 dB)
Frequency Response
47 Hz to 20 kHz ± 3 dB
Maximum Sound Pressure Level (SPL)
110 dB
Signal-to-Noise Ratio
75 dBA
Total Harmonic Distortion (THD)
<10%
THD+N
< 0.2%
Maximum Input Level
+20.3 dBu (Balanced)+6 dBV (Unbalanced)
Protections and Limiting
Peak Limiter
EQ
HF ShelfLF Shelf
Crossover Frequency
1425 Hz, 24 dB/Octave Slope
Crossover Type
Linkwitz-Riley
Connectivity
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
USB
No
Wireless
No
Mobile App Compatible
No
Power
AC Input Power
100 to 240 VAC, 50/60 Hz
Physical
Color
Black
Monitor Orientation
Vertical
Enclosure Material
ABS, MDF
Mounting Points
No
Dimensions (W x H x D)
8.8 x 14.2 x 11.1" / 223.5 x 360.7 x 281.9 mm
Weight
13.4 lb / 6.1 kg
Packaging Info
Package Weight
16.05 lb
Box Dimensions (LxWxH)
16.5 x 13.3 x 11.75"
What's in the Box:
JBL 306P MkII Powered 6.5" Two-Way Studio Monitor
Power Cord
Limited 2-Year Manufacturer Warranty
Brand:JBLSKU:306P MKIITags:306P MKII, jbl 306p, Loudspeaker
Bi-Amplified Powered Reference Monitor
Dual 56W Class-D Amplifiers
Low Frequency Woofer: 6.5"
Neodymium Woven-Composite Tweeter: 1"
Image Control Waveguide Technology
Balanced XLR and 1/4" TRS Inputs
3-Position HF Trim Switch
Boundary EQ for Placement Near Walls
Slip Stream Low-Frequency Port Design
Selectable Input Sensitivity Switch
Overview
Audio engineers, producers, and musicians looking for a high-quality monitoring solution will be impressed with the JBL 306P MkII - Powered 6.5" Two-Way Studio Monitor, a bi-amplified reference monitor with next-generation drivers, offering high detail, precise imaging, a wide sweet spot, and a remarkable dynamic range to enhance the mix capabilities of any modern workspace. The magnetically-shielded 306P MkII features dual 56W Class-D amplifiers, which power the 6.5" low frequency woofer and woven-composite 1" neodymium tweeter. The combined output of the woofer and tweeter offer a frequency response of 47 Hz to 20 kHz with a peak SPL of 110 dB.
The monitor features JBL's Image Control Waveguide technology for accurate audio reproduction and JBL's Slip Stream port design for improved bass response. The 306P MkII is equipped with a boundary EQ for controlling the low frequency response when placed near a wall, as well as a 3-position HF trim switch. To ensure flexible connectivity, JBL included a balanced XLR input and a balanced 1/4" TRS input, both of which feature dented level control. Other features include a selectable input sensitivity switch that ensures compatibility with a range of signal sources. The JBL 306P MkII ships with a power cord.Key Specs
Monitor Type & Configuration
Active 2-Way
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Frequency Range
39 Hz to 24 kHz (-10 dB)
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
Wireless
No
Number of Included Monitors
Single Monitor
Enclosure
Bass-Reflex/Ported, Shielded
Total Power Output
112 W
Tweeter
1x 1" / 25.4 mm Dome
Woofer
1x 6.5" / 16.5 cm Cone
Amplifiers
HF: 56 W Class-DLF: 56 W Class-D
Frequency Range
39 Hz to 24 kHz (-10 dB)
Frequency Response
47 Hz to 20 kHz ± 3 dB
Maximum Sound Pressure Level (SPL)
110 dB
Signal-to-Noise Ratio
75 dBA
Total Harmonic Distortion (THD)
<10%
THD+N
< 0.2%
Maximum Input Level
+20.3 dBu (Balanced)+6 dBV (Unbalanced)
Protections and Limiting
Peak Limiter
EQ
HF ShelfLF Shelf
Crossover Frequency
1425 Hz, 24 dB/Octave Slope
Crossover Type
Linkwitz-Riley
Connectivity
Audio I/O
1x XLR 3-Pin Balanced Line Input1x 1/4" TRS Balanced Line Input
Digital Audio I/O
No
Network I/O
No
USB
No
Wireless
No
Mobile App Compatible
No
Power
AC Input Power
100 to 240 VAC, 50/60 Hz
Physical
Color
Black
Monitor Orientation
Vertical
Enclosure Material
ABS, MDF
Mounting Points
No
Dimensions (W x H x D)
8.8 x 14.2 x 11.1" / 223.5 x 360.7 x 281.9 mm
Weight
13.4 lb / 6.1 kg
Packaging Info
Package Weight
16.05 lb
Box Dimensions (LxWxH)
16.5 x 13.3 x 11.75"
What's in the Box:
JBL 306P MkII Powered 6.5" Two-Way Studio Monitor
Power Cord
Limited 2-Year Manufacturer Warranty
Brand:JBLSKU:306P MKIITags:306P MKII, jbl 306p, Loudspeaker
Product information
COL-494210f6409f9c0d474b3059d041f5697b51df82
Other Products / General Merchandise / Other Products
Other Products / General Merchandise / Other Products
